Flashpoint Tester (Closed Cup)

The flash point for all fuels to be used in bulk onboard vessels is set at 60°C minimum (SOLAS* agreement)

The Flashpoint Tester / Analyzer is easy to use, completing a fuel flash/no-flash test in less than two minutes. It will determine the flash point of a lube sample within a temperature range of 0 to 300°C in typically 8 minutes.


For shipping reasons, a butane refill cartridge is not supplied and so will need to be purchased locally.

Digital display showing test parameters, instrument status, and the flashpoint test result.

Audible alarm when flashpoint test is completed and action is required from the operator.

Automatic flash detector enhances repeatability and reduces the chance of mis-interpretation.

Small sample size - 2 or 4ml.


Cup Material: Aluminum
Ramp Rate: 2 ° C / min ramp Sample size: 2 – 4 ml
Size: 26x28x26cm
Temp Range: Ambient 0 to 300°Test Duration, Rapid Equilibrium Mode: 1 minute below 100 °C, 2 minutes above 100 °C, or user determined 1 to 99 minutes. Voltage: 110/120V or 220/240V, 50/60Hz (switchable), 12Vdc with optional adapter
Weight: 4 kg


Cost € 4699.00